Ways to move a grand piano

Pianos consistently make movers yearly list of items that are most often harmed. Grand pianos are especially troublesome. Practicing the following treatments for taking apart, cushioning and filling grand pianos will prevent damage, lower claims expense, and improve client satisfaction.

1) At least three people are needed to deal with an infant grand piano. If the child grand piano needs to go up or down stairs or if a full or concert grand piano needs to be transported, a minimum of four people are needed.

2) Always complete a precise and thorough inventory. It may be more effective or essential to utilize a visual stock to sufficiently explain and show pre-existing damage.

3) As various parts are disassembled, please location all hardware in a correctly labeled parts bag and then position the parts bag in a "Parts Box".

4) Remove the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furniture pad.

5) Disconnect the cover by removing the hinge pins. Have one individual wiggle the cover, holding it opposite the hinge, while a second person works the pin loose. Please be mindful not to damage the wood with the pliers or with the pin itself. If necessary, cover the jaws of the pliers with a little fabric to assist prevent damage to the wood. Wrap the cover in a tidy furnishings pad.

6) Eliminate the prop that holds the lid open and wrap it in a tidy furniture pad. The prop has a hinge pin and remains in 2 pieces.

7) Remove the pedal assembly and cover it in a tidy furniture pad. The braces at the rear of the assembly rest in slots at each end. When getting rid of the screws, please be careful not to drop the braces. In addition, please be particularly careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the proper number on each rod. Keep in mind: If masking tape is unavailable, please use properly identified parts bags for this function. When reassembling at destination, please be sure to put the rods in the appropriate order so that the pedals will work appropriately.

8) Pad this page the piano by positioning a clean rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you manage the piano. Keep in mind: Please ensure that the surface area of the piano is dust-free before padding it.

9) Position a piano board and connect the straps so that it is ready to get the piano. The raised brace on the piano board ought to be at the keyboard end of the piano.

10) Get rid of the left front leg by positioning one person beneath the piano at the left end of the keyboard. Be sure to have 2 individuals raising the corner of the piano while the 3rd individual gets rid of the leg. Keep in mind: Please be sure to note which legs were removed from which positions because some pianos have legs that are not interchangeable.

11) Place the piano on the piano board by reducing the "leg-less" end onto the board. Please make sure to lift the entire piano slightly while completing this maneuver to prevent undue pressure on the remaining, attached legs as the piano pointers. Raise the piano to an upright position on the board. Keep in check these guys out mind: Please guarantee that the soundboard is safe before lifting. Make certain that the piano is focused snugly against the brace at the end of the piano board. Keep in mind: Never leave the piano unattended. Always have at least one person holding the piano constant at all times.

12) Remove the 2 remaining legs and cover them in clean furnishings pads. These legs are held in place by a "crucial and slot" arrangement. To get rid of the leg, slide it inward toward the center of the piano till it comes out of the slot.

13) Secure the piano to the piano board by bringing completions of the straps together and fastening them. Location folded burlap pads over the furnishings pads but under the straps to offer extra protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.

14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for security versus house damage, place the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the leading end of the piano board to avoid the piano from slipping.

16) To load the piano, leave it on the piano board and place it in a tier as the first base item with the keyboard dealing with the wall of the preceding tier. The finest location to load the padded lid is between the piano and the preceding tier or between the piano and the wall.

Although grand pianos represent a considerable obstacle, they can be moved without damage by using sound judgment and practicing the procedures listed above.

Leave a Reply

Your email address will not be published. Required fields are marked *